Wallbox Pulsar Max 22kW EV Charger Installation with Creos R2 Automation in Strassen, Luxembourg
Location
Strassen (L-8041), Luxembourg
Date
13 November 2026
Client
Rustam Maklufi — Strassen (L-8041)
Features
Project Description
⚡ Executive Summary — Key Project Takeaways (Strassen L-8041)
- Project Reference & Location:
SPARK-2026-045— Residential garage & main switchboard upgrade at Rue Scheen Acht, L-8041 Strassen, Luxembourg. - Charging Hardware Installed: Wallbox Pulsar Max 22 kW (configured at 16A 3-phase / 11 kW for residential grid compliance) with integrated 7-meter Type 2 cable, dedicated wall holster, and Wi-Fi / Bluetooth myWallbox smart app control.
- Dedicated 3-Phase Switchboard Protection: 25 meters of heavy-duty NYY-J 5×4 mm² copper cable protected by an ABB F204 A-40/0.03 (4-pole 40A 30mA residual current differential breaker) and an ABB S203S-B20 (3-pole 16A/20A safety circuit breaker).
- Creos R2 Grid Automation (TAB Creos Compliant): Equipped with an Eaton Z-SCH230/63-04 (25A/63A, 230V AC, 4 NC contacts, 3TE) installation contactor, Eaton FAZ-C2/1 (1P 2A C-curve 15 kA) control breaker, and direct Smarty (Sagemcom T210-D) bus connection for Creos R2 remote load modulation.
- Turnkey Administration: Full Creos technical declaration and Luxembourg Government Klimabonus subsidy dossier included at €0 administrative surcharge.
Project Overview: Smart Home EV Charging in Strassen (L-8041)
Our residential client in Strassen (L-8041), Luxembourg contacted SparkSonic SARLS for a complete, future-proof electric vehicle charging solution (installation borne de recharge à domicile) inside a private residential garage. The objective was to mount a compact, weather- and impact-resistant smart Type 2 wallbox right beside the sectional garage door while upgrading the main residential distribution board (tableau électrique) to meet 100% of Creos Luxembourg TAB and R2 load-management regulations.
Complete Hardware & Electrical Bill of Materials (BoM)
Every component installed on this Strassen project was selected from tier-one European manufacturers (Wallbox, ABB, and Eaton) to guarantee long-term thermal safety, VDE/ILNAS compliance, and seamless inspection approval:
Step-by-Step Engineering & Switchboard Integration
- Main Switchboard Upgrade & Phase Distribution: Inside the main residential cabinet housing the Creos Smarty (Sagemcom T210-D) digital smart meter, our certified electricians installed a dedicated 4-pole phase/neutral/earth distribution block with precision-crimped ferrules and clean DIN-rail trunking.
- ABB Differential & Overcurrent Protection: We mounted a dedicated ABB F204 A-40/0.03 (40A, 30mA, 4-pole) differential switch alongside an ABB S203S-B20 3-pole safety breaker, isolating the EV charging circuit from the rest of the household loads.
- Creos R2 Automation Wiring (Eaton Z-SCH230 + FAZ-C2/1): To comply with Creos Luxembourg grid management rules for residential charging stations, we integrated an Eaton Z-SCH230/63-04 4-pole installation relay protected by an Eaton FAZ-C2/1 2A breaker and linked the R2 control cable directly to the Creos Smarty meter interface.
- 25m NYY-J 5×4 mm² Routing & Garage Mounting: A 25-meter NYY-J 5×4 mm² cable was routed cleanly in rigid grey PVC conduit with a flexible liquid-tight sweep entry into the bottom of the Wallbox Pulsar Max. Beneath the charger, we installed the dedicated Type 2 wall dock to hold the 7-meter charging cable neatly off the garage floor.
- Smart Commissioning & Subsidy Handover: The Wallbox Pulsar Max LED halo ring verified balanced 3-phase voltage, Wi-Fi/Bluetooth app control was configured for off-peak charging schedules, and SparkSonic prepared the complete Creos declaration + Klimabonus state subsidy documentation.
🇫🇷 Résumé du Projet en Français (Installation Borne de Recharge à Strassen L-8041)
SparkSonic SARLS a réalisé l’installation clé en main d’une borne de recharge intelligente Wallbox Pulsar Max 22 kW (configurée en triphasé 16A / 11 kW avec câble Type 2 de 7 mètres) dans un garage résidentiel à Strassen (L-8041), Luxembourg. Le tableau électrique principal (équipé du compteur intelligent Creos Smarty Sagemcom T210-D) a été mis à niveau avec un interrupteur différentiel tétrapolaire ABB F204 A-40/0.03 (40A 30mA), un disjoncteur tripolaire ABB S203S-B20, 25 mètres de câble NYY-J 5×4 mm², ainsi que le kit complet d’automatisation Creos R2 (contacteur Eaton Z-SCH230/63-04 et disjoncteur Eaton FAZ-C2/1). Toutes les démarches de déclaration Creos et le dossier de subvention étatique Klimabonus ont été pris en charge gratuitement par SparkSonic.
Frequently Asked Questions — EV Charger & Creos R2 Installation in Strassen
Why is Creos R2 automation (Eaton contactor + FAZ-C2/1 breaker) important for an EV charger in Luxembourg?
In Luxembourg, network operator Creos requires residential EV charging installations above standard thresholds to support grid load modulation (régulation R2 via compteur Smarty) or dynamic load management. Installing the Eaton Z-SCH230 contactor, Eaton FAZ-C2/1 control breaker, and Smarty bus cable ensures 100% TAB Creos compliance and protects your main house fuses from tripping during peak loads.
Why use a 7-meter Type 2 cable with the Wallbox Pulsar Max in a residential garage?
A 7-meter tethered Type 2 cable allows effortless connection whether the electric vehicle is parked nose-in, backed-in, or parked just outside the garage door in Strassen—eliminating the need to unpack a portable trunk cable in the rain.
Does SparkSonic handle the Creos declaration and Klimabonus subsidy paperwork?
Yes. Every turnkey EV charger installation by SparkSonic SARLS in Strassen and across all 102 communes of Luxembourg includes complete Creos technical notification and government Klimabonus subsidy documentation at no extra cost.
Planning a Wallbox or EV Charger Installation in Strassen or Luxembourg?
Speak directly with SparkSonic’s certified electricians for a fast site inspection, transparent itemised quote, and full Creos & Klimabonus paperwork handling.
Project Gallery
Planning a Similar Project in Luxembourg?
Request your free quote and on-site technical assessment from our Creos-certified electrical & energy team.